Asynchronous electric motors Seipee Italy
Standard single-phase and three-phase asynchronous electric motors for general purpose in industrial applications, with a cage rotor, fully enclosed housing and cooling with a windmill on the rotor shaft. Capacities according to standard: IEC 60034-1.
STANDARD MONO-PHASE AND THREE-PHASE ASYNCHRONOUS ELECTRIC MOTORS
TECHNICAL CHARACTERISTICS
- Protection IP 55, insulation class F, continuous operation S1
- Housing made of light alloy, cast aluminum or cast iron for sizes > 160
- PTC thermal protection of the coil
- Radial ball bearings with double protection (ZZ) and lifetime lubrication.
- Suitable for applications where power is provided via a frequency converter.
- Serial accessories: incremental or absolute encoder position transmitter, el. heaters, additional thermal protection, anti-corrosion protection, mechanical protection IP 56, 65 and 68
|
Standardized sizes: |
IEC 56 - IEC 450 |
|
Power: |
0,09 kW - 1000 kW |
|
Number of poles: |
2, 4, 6, 8 |
|
Nominal speed n1: |
3000 min-1 / 1500 min-1 / 1000 min-1 / 750 min-1 |
ASYNCHRONOUS THREE-PHASE MOTOR WITH BRAKE
Technical characteristics
Asynchronous three-phase motor with electromagnetic brake for industrial use, completely enclosed, externally fan cooled. Protection IP 55, thermal insulation class F, operating mode S1.
The brake has two power versions;
- A.C. power brake.
- DC powered brake.
|
Sizes: |
180 - 280 |
|
Power: |
15 kW - 55 kW |
|
Braking torque: |
130 Nm - 600Nm |
|
Number of poles: |
2, 4, 6, 8 |
|
Nominal speed-number of revolutions n1: |
3000 min-1/ 1500 min-1/ 1000 min-1/ 750 min-1 |
